ABOUT TAIBANG ENGINEERING
Established on 26 September 2022, Cangzhou Taibang Machinery Equipment Co., Ltd. (沧州泰帮机械设备有限公司) is located in Botou Economic Development Zone, Cangzhou, Hebei, China. We discuss custom roll forming equipment around the buyer’s profile, material and workshop constraints. Company history on this site begins at that founding date; we do not present earlier heritage, named founders, headcount or patents.
COMPANY TIMELINE
This timeline records only what this company page can support. It is not a claim of decades of prior operation.
| Stage | What we can state |
|---|---|
| 01 / Founding | 26 September 2022 — Cangzhou Taibang Machinery Equipment Co., Ltd. established in Botou Economic Development Zone, Cangzhou, Hebei. |
| 02 / Tooling & workshop focus | Work discussion centres on roller tooling, machine assembly, cutoff arrangements and trial observation in the workshop — using supplied photographs as conversation starters, not as certified plant tours. |
| 03 / Overseas project discussion | Destination power, safeguards and acceptance records are planned per order. See Quality Standards for electrical and mechanical topics and Factory & Inspection for the factory-acceptance discussion protocol. |
Inquiries are handled by an engineering project lead rather than commissioned sales intermediaries. We aim to provide initial engineering clarification and specification review within a 12-hour response window, accommodating international time zones. That window is a communication target, not an on-site dispatch promise.
Drive motors across all Taibang production lines hold current CE attestation (Certificate M.2023.206.C82549) covering EU Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU, verified by UDEM International and valid through March 2028. Full details and certificate download on Quality & Compliance.
WORKSHOP VIEWS / PROJECT DISCUSSION
Workshop-zone photographs for discussion: line assembly and controls, tooling interface, cutoff station, and outfeed handling. Captions name visible arrangements. They do not certify a plant layout, ownership, inspection result or performance.
Line layout, roller stands and control-panel placement are reviewed against the buyer’s floor plan and utilities. Photographs show typical workshop arrangements used in conversation.
Roller tooling and interface details are discussed from drawings and workshop views. CNC and tooling clips on other pages illustrate process, not a guaranteed machine configuration.
Cutting-station layout, guarding and sample handling are agreed in the equipment scope and in the factory-acceptance protocol.
Outfeed supports and sample discharge are planned so inspection points can be reached during a trial. Limits belong in the written acceptance plan, not in a photograph caption.
PROJECT ROLES — NOT A NAMED ROSTER
This website does not publish executive names, portraits or headcount. Project work is described by role. Named individuals can be introduced in private correspondence when the owner authorises it.
Coordinates the brief: profile, material, destination utilities and the written offer. First technical replies are routed through this role.
Covers roller tooling, assembly sequence and what can be observed during a workshop trial. Not a named machinist list.
Collects voltage, frequency, panel topics and buyer-specified rules. Formal certificates are not displayed here; see Quality Standards.
Packing, documents, remote guidance and any on-site visit are contract items. See Services for the after-sales architecture.
Continuous EPS and rock wool sandwich panel lines for 50-250 mm insulated roof and wall panels (0.4-0.8 mm PPGI/GI facings). Double-belt laminating, servo flying band saw & FAT trial video.
Explore equipment
Custom metal roofing and wall cladding roll forming machines for 0.3-0.8 mm PPGI, GI and Aluzinc coil. Solid 70-75 mm shafts, Cr12 hydraulic shear, 380V-480V grid match & workshop trial video.
Explore equipment
Stepped glazed metal roof tile roll forming lines with 12-16 forming stands, hydraulic step-pressing (150-250 mm adjustable pitch) and Cr12MoV 3D contour shear. Built to your profile drawing.
Explore equipment
Custom C, Z, U and Sigma structural purlin roll forming lines (1.5-3.0 mm Q235/Q355 coil, C80-C300 & Z120-Z300 web sizes). Multi-station hydraulic punching, width changeover & 7-step FAT protocol.
Explore equipment
Heavy-duty pallet rack and AS/RS warehouse upright roll forming lines for 1.5-4.5 mm structural steel coil. Servo roll feeding, modular teardrop/slot pre-punching & custom profile tooling.
Explore equipmentSolar PV mounting strut channel (41x41 / 41x21 mm) and tracker bracket roll forming lines for 1.2-3.5 mm GI and ZAM coated steel. Vacuum-hardened DC53 dense slot punching & surface-safe rolls.
Explore equipment
Heavy-duty 2-wave W-beam and 3-wave Thrie-beam highway guardrail roll forming lines for 2.5-4.5 mm structural strip. Cast-iron arch stands, gearbox drive, flat-strip pre-punching & contour shear.
Explore equipmentLight-gauge steel C-stud and U-track roll forming machines for 0.4-1.5 mm galvanized strip (50-150 mm web widths). In-line service hole punching, dimpling, flying shear & motorized width sizing.
Explore equipment
Multi-width U-channel cargo box and truck body panel roll forming lines for 1.0-2.5 mm steel coil. Split-roll lead-screw width adjustment (50-150 mm or 200-500 mm families) & Cr12MoV post-cut shear.
Explore equipment
Universal square channel and door frame guide rail roll forming lines for 0.8-2.0 mm steel coil (e.g. 110x110 mm with 30x25 mm internal slot). Multi-size spacer changeover & straightener head.
Explore equipment
Upstream steel coil slitting and 7-to-17-roll precision leveling lines for 0.3-6.0 mm coil (up to 1500 mm width, 3-10 t decoiler). Cr12MoV rotary slitter knives for clean roll forming strip feed.
Explore equipmentA useful project conversation covers the profile, material and intended output together. Describe the products you plan to manufacture and the practical constraints in your workshop.
Electrical cabinets, emergency-stop circuits, interlocked guarding and motor supply are engineered per project. Our drive motors carry CE attestation under EU Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU; European electrical-safety discussion references EN 60204-1. North American projects often specify 480V 3-phase supply. Full compliance details and certificate download: Quality & Compliance.
We work with AutoCAD DWG and DXF profile cross-sections under confidentiality. To protect proprietary customer designs, drawings and custom layouts are exchanged privately by email under mutually agreed non-disclosure terms, rather than uploaded through unencrypted public channels. Do not send sensitive files until the project contact has confirmed how they will be stored.
Discuss machinery, auxiliary equipment, inspection and installation as one project. Use the technical schedule and commercial offer to record responsibilities on each side. After-sales topics live on Services; commercial wording lives on Terms of Sale.
Your next production line
Send your drawing, material, finished output target and destination. Build the equipment, inspection and delivery scope into one project brief.
